Rotating Bending Fatigue Testing Machine@[Japan]
YAMAMOTO METAL TECHNOS CO., LTD.
Japanese
Top Company Info News Products Site Map contact
TOP
GIGA QUAD Line up
YRB200
YRB300L
YRB300A
Corrosion environmental testing unit YRB200-010
High temperature environmental testing unit YRB200-030
High temperature environmental testing unit(Halogen Lamp)
2-step variable loading unit
Q&A
Libcy
Technical information



papers
Products

Mulch-spindle rotating bending fatigue testing machine


GIGA DUAL
Model F YRB300A
GIGA QUAD series YRB300A
Contact

Advantages

High Efficiency
GIGA DUAL is convenient to get a number of fatigue test data very quickly, because two specimens can be tested simultaneously.
In order to obtain one S-N curve, two specimens can be tested at different stress levels by giving different weights for the respective specimens. Thus, S-N property of a definite material can be obtained within the reasonable short period.
From this point of view, the present machine of GIGA DUAL has a significant performance of the high efficiency.
Easy operation
In this testing machine, collet nuts and collet chucks are used to fix and remove the specimens.
When the user wants to fix a specimen, the specimen is inserted into the collet chuck as indicated in this figure, and he tightens the collet nut by using a spanner.
And when he wants to remove the specimen, he loosens the collet nut by the spanner, and pull out it by fingers.

About the collet chucks, different inner diameters such as 6mm, 8mm and 10mm are prepared in advance.
Thus, the user can choose the most convenient size of the collet chuck depending on their own requirements.
How to fix , How to remove
Small eccentricity
The advantage is to use high performance collet chuck and nut. Thus, small eccentricity of the specimen after chucking was realized.
Such a small eccentricity is fundamentally important to perform the fatigue tests in rotating bending.
If the eccentricity becomes large, problems of vibration and noise take place in the fatigue tests and, therefore, some extent of error is included in the applied stress.
According to preliminary experiments, no effect of the eccentricity was found for fatigue test data to obtain the S-N property, if the eccentricity is kept within }30m.
This is the reason why eccentricity is focused as an important subject as a ROTATING BENDING FATIGUE TESTING MACHINE.
From this point of view, the eccentricity was kept within }20m.
One handed type
Plating, heat treatment, thermal spray, shot peening, laser, coatingc.
GIGA DUAL is suitable for any kind of research and studies for metal fatigue characteristics with surface modification.
Because the effective volume of the specimen in the cantilever bending(One-handed type) is much smaller than that in the uniform bending(both-handed type).
This means that it is small percentage that the specimen is broken by material inner defect in the case of one-handed type.
Specification

GIGA DUAL
       
Spindle  spindle number    2
spindle speed  PRM 3000
motor  KW 0.09
Capacitance   V AC single 220/230
Bearing  spindle   Deep groove ball bearing
specimen   Deep groove ball bearing
Collet chuck chuck size mm 2.5`13
Maximum load   kgf 15X2
Belt type     Timing belt
Size of device  weight kgf about 50
size  mm 480X480X530
Service life   year 5
Guaranteed term   year 1

It is possible to change the specification for the other country.

Product specifications and appearance may be changed for the improvement. We appriciate your understanding.
TECHNICAL INFORMATION
>> PageTop



YAMAMOTO METAL TECHNOS CO., LTD.
Rotating Bending Fatigue Testing Machine@[Japan]

4-7, Setoguchi 2-chome, Hirano-ku, 547-0034 Osaka Japan
TEL: 81-6-6704-1800@E-mail: info@yama-kin.co.jp


Top | Company Info | News | Products | Site Map | Contact