Rotating Bending Fatigue Testing Machine [Japan]
YAMAMOTO METAL TECHNOS CO., LTD.
Japanese
Top Company Info News Products Site Map contact
TOP
GIGA QUAD Line up
YRB200
YRB300L
Corrosion environmental testing unit YRB200-010
High temperature environmental testing unit(Halogen Lamp)
2-step variable loading unit
Q&A
Libcy
Technical information



papers
Products

For dual-spindle rotating bending fatigue testing machine (YRB200)


Corrosion environmental testing unit
Model : YRB200-010
GIGA QUAD series Corrosion environmental testing unit YRB200-010
Contact

Various kinds of mechanical structures have to be used in corrosive environments.
In the mechanical design of such products, fatigue test data in the corresponding environment should be obtained as the fundamental design data.
GIGA QUAD with 'Corrosion environmental testing unit' can be applied to perform fatigue tests in such cases.

Advantages

Anti-corrosion of testing machine
Special technique was introduced in this additional facility in order to avoid the corrosive damage of the fatigue testing machine itself.
In order to avoid leakage of the solution and its fine splashes from the chamber, a little negative pressure was always given inside the resin chamber.
And corrosive solution is stored in the tank inside the stand, and the solution is pumped up by the tube pump.
Thus, the corrosive solution can be dropped down onto the specimen.
The dropped solution is sucked in the drainage tank provided a little negative pressure.
Controllable of corrosion speed
It is possible to control the speed of corrosion liquid (salt water etc.) in 25 steps by using the adjuster mounted on the front panel of the stand.

Specification

       
Number of testing Specimen   
Size of device   Total weight kgf 22
Size of device  mm 380×380×1200
Weight of compressor  kgf 22
Size of compressor  mm 500×380×350
Weight of controller  kgf 3
Size of controller   mm 210×200×60
Voltage    Capacitance    AC single phase 90〜240V
Capacitance of compressor    AC single phase 100V 
Corrosion speed        25 steps
※ Quantity of corrosion speed (ml/min)is depend on viscosity and diameter of the nozzle.
  In case of water and φ3.2mm (nozzle diameter), it is possible to control at the range of 0.25 ~ 2.2ml/min.
Possible testing time hour 5000
※ Recommendation for exchange after the use of 5000 hours.
※ Possible usage for many kinds of corrosion liquid. But, asked to YAMAMOTO METAL TECHNOS CO., LTD. in case of special corrosion liquid.
※ Product specifications and appearance may be changed for the improvement. We appriciate your understanding.
TECHNICAL INFORMATION
>> PageTop



YAMAMOTO METAL TECHNOS CO., LTD.
Rotating Bending Fatigue Testing Machine [Japan]

4-7, Setoguchi 2-chome, Hirano-ku, 547-0034 Osaka Japan
TEL: 81-6-6704-1800 E-mail: info@yama-kin.co.jp


Top | Company Info | News | Products | Site Map | Contact